Garret

What are the comparable differences between Epoxy-Coat Cycloaliphatic epoxy and other type of epoxies? The most important differences between floor coating epoxies are listed below:

A. Epoxy-Coat is a 100% solids epoxy. This is a term used to describe the volume solids in a coating system. It is what is left over after the product dries. 100% solids yields 100% dried material after the coating fully dries. 50% volume solids yield 50% of the thickness after the coating fully dries. Most epoxies are 30%-40% volume solids. If you wish to compare the thickness after dried application between Epoxy-Coat and normal epoxies you would need 2.5x the gallons to equal exactly the thickness of 1 gallon of Epoxy-Coat.

Epoxy-Coat is a Cycloaliphatic epoxy. What is a Cycloaliphatic epoxy? It is a type of epoxy. Just like there are types of automobiles that perform differently (and vary in costs) so do epoxies. Not all epoxies are the same. If you wish to apply a high performance floor coating you would want a 100% solids epoxy (to achieve a thickness suitable for proper aesthetics and durability), a high abrasion resistance, a product that would be resistant to yellowing or fading over time, high gloss, highly chemical resistant, impact resistant, 0 VOC's (Volatile Organic Compounds) for low odor and safety in application in odor and VOC sensitive environments. Most floor coating epoxies are not Cycloaliphatic 100% solids. They are the most expensive to manufacture. They can cost up to 4x the amount of other epoxies to manufacture. Epoxy-Coat is the same quality of epoxy as is used in the most demanding industrial / commercial floors. In fact approx. 60% of industrial / commercial floors use a less quality Aliphatic 100% solids epoxy in their applications.

25 years experience in floor coating